Intel MD566X User Manual
Page 61
56K V.92 Data, Fax, and Voice Chipset
Programmer’s Guide
Intel Confidential
61
+PSS=m
2
Use Short Sequence: This command causes a calling DCE to force either a V.92
short or full startup sequence as defined by the +PQC command on the next and
subsequent connections.
m = 0
The DCEs decide whether or not to use the short startup proce-
dures. The short startup procedures shall only be used if enabled
by the +PQC command.
m = 1
Forces the use of the short startup procedures on the next and sub-
sequent connections if they are enabled by the +PQC command.
m = 2
Forces the use of the full startup procedures on the next and subse-
quent connections independent of the setting of the +PQC com-
mand.
a. Current download speeds are limited to 53,333 bps due to FCC rules that restrict modem power output.
Table 3-4.
Data Mode Command Descriptions (Continued)