Invacare 6210 - Manual (Page 10)

10
REPLACING THE GRIPS (FIGURE 7)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY
in this instruction sheet.
1. Remove the EXISTING grip and end plug. Discard both.
2. Apply a thin coat of hair spray on the inside of the NEW grip and on to the handle.
NOTE: This application will make it easier to slide the grip onto the push
handle bar.
3. Slide NEW grip onto one end of the push handle.
4. Install NEW end plug.
FIGURE 7 - REPLACING THE GRIPS
FIGURE 6 - INSTALLING THE CRUTCH TIPS
Crutch Tip
Wheel Insert
Rear Left
Frame Tube
Grip
Handle Bars
End Plug