Invacare 6210 - Manual (Page 6)

6
WHEELS (FIGURE 3)
Replacing The Wheel
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY
in this instruction sheet.
1. Remove the set screw from the wheel insert.
2. Perform one (1) of the following:
One-Way Wheels: Remove the existing mounting screw, washer and spacer
that secure the existing one-way wheel to the wheel insert.
Two-Way Wheel: Remove the existing mounting screw, washer, bushing
and spacer that secure the existing two-way wheel to the wheel insert.
3. Remove EXISTING wheel and discard.
4. Reverse STEPS 1-2 to install the NEW wheel.
Replacing The One-Way Wheels With Two-Way Wheels
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY in
this instruction sheet.
NOTE: two way wheels are shipped assembled to the wheel insert.
1. Remove the mounting screw, washer and locknut securing the one-way
wheel and EXISTING wheel insert to the tube frame.
2. Remove the one-way wheel and EXISTING wheel insert and discard.
3. Insert the NEW wheel insert with two-way wheel into the tube frame and
secure with mounting screw, washer and locknut.