Invacare 6210 - Manual (Page 5)

5
Release
Button
Snap Buttons
Handle UNFOLDED
FOLDED
Lock
Bar
Height
Adjustment
Holes
Handles
Walker
Frame
Walker
Frame
ADJUSTING THE HANDLE BARS (FIGURE 2)
NOTE: Refer to INSTALLATION WARNINGS in the SAFETY SUMMARY
in this instruction sheet.
1. Depress both snap buttons and raise/lower the handle to the desired height.
2. Ensure both snap buttons fully protrude through one (1) of seven (7) sets of
height adjustment holes in the front frame tube.
3. Repeat STEPS 1-2 on remaining handle.
FIGURE 2 - ADJUSTING THE HANDLE BARS
FIGURE 1 - OPENING/FOLDING THE WALKER
Snap Buttons
Front Frame Tube
Handle
Height Adjustment
Holes