Invacare 6210 - Manual (Page 8)

8
1. Remove the four (4) mounting screws, washers and locknuts that secure the
four (4) wheel inserts to the walker frame. Remove the four (4) wheel inserts.
2. Install the right two-way wheel insert into the right rear frame tube. Secure
with mounting screw, washer, and locknut.
3. Install the left two-way wheel insert into the left rear frame tube. Secure with
mounting screw, washer, and locknut.
4. Install the right one-way wheel insert into the left front frame tube. Secure
with mounting screw, washer and locknut.
5. Install the left one-way wheel insert into the right front frame tube. Secure
with mounting screw, washer and locknut.
FIGURE 4 - CONVERTING THE REVERSE POSTURAL (PULLING) WALKER
TO A FORWARD (PUSHING) WALKER
Left Rear
Frame Tube
Right Rear
Frame Tube
Left Front
Frame Tube
Right Front
Frame Tube
Left One-
Way Wheel
Insert
Left Two-Way
Wheel Insert
Right Two-Way
Wheel Insert
Walker
Frame
Right One-Way
Wheel Insert
Locknut
Washers
Mounting
Screw
NOTE: Reverse Postural
(Pulling) Walker Shown.