IBM 2104 Model DU3 - Manual (Page 19)

Installing a 2104 Model DU3 into a Rack
Installing a 2104 Model DU3 into an RS/6000 or IBM Eserver pSeries rack is done
by:
1. Preparing the rack
2. Removing the disk drive modules from the 2104 Model DU3
3. Installing the 2104 Model DU3 into the rack
4. Reinstalling the disk drive modules into the 2104 Model DU3
The procedure that is recommended is described in the next four sections of this
book, but first you need to check whether you have received all the parts required
for your 2104 Model DU3.
Installing a 2104 Model DU3 3