IBM 2104 Model DU3 - Manual (Page 51)

Appendix A. Operating with RISC Systems
This appendix gives advice for operating an RS/6000 or IBM
EserverpSeries
computer to which one or more Expandable Storage Plus 2104 Model DU3 is
attached.
SCSI Service Aids
Service aids are available on the using system to help you service the 2104 Model
DU3. Service aids described in the Expandable Storage Plus: 2104 Models DU3
and TU3 Service Guide are:
v Format Media
v Certify Media
v SCSI Device Identification and Removal
v Download Microcode
Identifying 2104s and Disk Drive Modules
AIX
When running AIX, you can identify an Expandable Storage Plus 2104 Model DU3
and the disk drive modules installed in it either by the location code contained in
system messages that refer to that unit, or by using the SCSI Device Identification
and Removal service aid.
See “Location Codes” in the operator guide for your system for general information
about location codes.
Linux
When running Linux, you can identify an Expandable Storage Plus 2104 Model DU3
and the disk drive modules installed in it by using the “List Configuration” command.
Consult your Linux operating system documentation for information in how to use
this command.
Note: Refer to the 2104 Interoperability Matrix link located at
http://www.storage.ibm.com/disk/expplus/supserver.htm to learn which
versions of AIX or Linux are supported for the Expandable Storage Plus
family of products.
Configuring a 2104 to the using system
AIX
When running AIX, use the cfgmgr command to configure or reconfigure a 2104 to
the using system.
Note: This command might not be valid for your RAID adapter.
Linux
Refer to the 2104 Interoperability Matrix link located at
http://www.storage.ibm.com/disk/expplus/supserver.htm to learn which versions of
AIX or Linux are supported for the Expandable Storage Plus family of products.
35
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|