Intel 460GX - Manual (Page 245)

Intel® 460GX Chipset Software Developer’s Manual 13-1
Universal Serial Bus (USB)
Configuration
13
The IFB integrates one USB Controller. The USB Controller is UHCI 1.1 compliant and
implements the root hub of the USB, which contains two ports.
The IFB PCI Function 2 reflects the USB Host and Root Hubs, with 2 connected USB ports. The
register set associated with USB Host Controller is shown below with actual register descriptions
given in
Section 13.2 and Section 13.3 .
13.1 PCI Configuration Registers (Function 2)
Table 13-1. PCI Configuration Registers–Function 2
Configuration
Offset
Mnemonic Register
Register
Access
00–01h VID Vendor Identification RO
02–03h DID Device Identification RO
04–05h PCICMD PCI Command R/W
06–07h PCISTS PCI Device Status R/W
08h RID Revision Identification RO
09-0Bh CLASSC Class Code RO
0Ch – Reserved –
0Dh MLT Latency Timer R/W
0Eh HEDT Header Type RO
0F–1Fh – Reserved –
20–23h USBBA USB I/O Space Base Address R/W
24–3Bh – Reserved –
2C–2Dh SVID Subsystem Vendor ID RO
2E–2Fh SID Subsystem ID RO
30–3Fh – Reserved –
3Ch INTLN Interrupt Line R/W
3Dh INTPN Interrupt Pin RO
3E–5Fh – Reserved –
60h SBRNUM Serial Bus Release Number RO
61–69h – Reserved –
6A–6Bh MCR Miscellaneous Control Register R/W
6C–BFh – Reserved –
C0–C1h LEGSUP Legacy Support R/W
C2-C3h --- Reserved ---
C4h USBREN USB Resume Enable R/W
C5-FF --- Reserved ---