Integra DSR-4.8 - Manual (Page 12)

12
Front & Rear Panels
For detailed information, refer to the pages in brackets.
Standby/On button [28]
This button is used to set the DVD receiver to On or
Standby.
Standby indicator [28]
This indicator lights up when the DVD receiver is in
Standby.
Input selector [31] and indicator
This selector is used to select from the following
input sources: DVD, VIDEO 1, VIDEO 2/DOCK,
FM, AM.
Disc tray [33]
Discs are loaded here.
Open/Close button [33]
This button is used to open and close the disc tray.
The input source is automatically set to DVD.
Stop button [34]
This button is used to stop playback.
Play button [33]
This button is used to start playback.
The input source is automatically set to DVD.
Master Volume control [31] and indicator
This control is used to adjust the volume of the
DVD receiver to Min, 1 through 79, Max.
Phones jack [31]
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
(1
HDMI button [30]
This button is used to turn HDMI on or off.
(2
HDMI indicator [30]
This indicator lights up when a HDMI signal is
being output.
(3
Remote control sensor [11]
This sensor receives control signals from the remote
controller.
(4
Previous/Next / buttons or Tuning/
Preset / buttons [34, 39]
The Previous [ ] button is used to select the pre-
vious chapter or track. During playback it selects
the beginning of the current track.
The Next [
] button is used to select the next
chapter or track.
When the AM or FM input source is selected, these
buttons are used to tune the tuner, or select radio
presets.
(5
Pause button or Preset Memory button [33,
35, 40]
This button is used to pause playback. While play-
back is paused, pressing this button moves the video
forward one frame at a time.
When the AM or FM input source is selected, this
button is used to store the radio presets.
Front Panel
(2 (4 (1 (3 (5