Understanding common operations, Adjusting the volume selecting the input source, Using headphones – Integra DSR-4.8 User Manual

Page 31

Advertising
background image

31

Understanding Common Operations

Use the Master Volume control, or the remote control-
ler’s VOL [

]/[

] button.

The volume can be set to “Min”, “1” through “79”,
“Max”.
Depending on subwoofer level or listening mode, the
maximum volume varies.

You can select DVD, FM, AM, or connected other AV
component (set top box, Onkyo RI Dock) as the input
source.
Use the DVD receiver’s Input selector to select the input
source.
To select the input source with the remote controller,
press the Input [ ] or [ ] button repeatedly.

When reproducing the audio and video signals from
HDMI IN, select “VIDEO 1”.

You can connect a pair of stereo headphones (1/4-inch
phone plug) to the DVD receiver’s Phones jack for pri-
vate listening, as shown.

Notes:
• Always turn down the volume before connecting your

headphones.

• The speakers are turned off while the headphones plug

is inserted in the Phones jack.

• When you connect a pair of headphones, the listening

mode is set to “Stereo”, unless it’s already set to “Ste-
reo” or “Direct”.

• Only the Stereo and Direct listening modes can be

used with headphones (the listening modes available
also depend on the currently selected input source).

Phones

Input selector

Master Volume control

Input

Muting

VOL

Sleep

/

Adjusting the Volume

Selecting the Input Source

DVD receiver

or

Remote

controller

DVD receiver

Remote

controller

or

DVD

VIDEO 1

VIDEO 2/DOCK

FM

AM

Using Headphones

Advertising