IBM TIVOLI ADSTAR 5697-VM3 - Manual (Page 20)

is what needs to be updated. You will need to replace the current DISABLED
entry for PRODID 5654A09A (Tivoli ADSM for VM) with the entry from the
5654A09A PRODSYS file (created by VMFINS in the previous step). If
necessary, refer to the VM/ESA Planning and Administration manual for more
information about the CP system configuration file.
What's Next?
All remaining installation steps have already been completed for you. Continue with 6.4.2, “Place
Tivoli ADSM for VM into Production” on page 25.
Notes:
1. If, in the future, you are no longer licensed for Tivoli ADSM for VM 3.1.2, you must follow the
instructions in Appendix B, “Disabling Tivoli ADSM for VM” on page 43 to disable Tivoli
ADSM for VM.
2. If you do not have a set of manuals for Tivoli ADSM for VM 3.1.2, you should contact your
IBM marketing representative and order Tivoli ADSM for VM as described in 2.0, “Program
Materials” on page 3. Remember to check the area which indicates to suppress media
shipment, which will order you a set of manuals for Tivoli ADSM for VM 3.1.2.
End of VM/ESA Version 2 Release 4.0 Licensed Users of Tivoli ADSM for VM only!
6
Mount the Tivoli ADSM for VM installation tape and attach it to the user ID at
virtual address 181. The VMFINS EXEC requires the tape drive to be at
virtual address 181.
7
Load the Tivoli ADSM for VM product control files to the 51D minidisk.
vmfins install info (nomemo The NOMEMO option will load the memos from the
tape but will not issue a prompt to send them to
the system printer. Specify the MEMO option if
you want to be prompted for printing the memo.
This command will perform the following:
load Memo-to-Users
load various product control files, including the
Product Parameter File (PPF) and the
PRODPART files
create VMFINS PRODLIST on your A-disk.
The VMFINS PRODLIST contains a list of
products on the installation tape.
16
Tivoli ADSM for VM Program Directory