IBM -4900 - Manual (Page 25)

MAKING AN OUTGOING CALL
The IBM-4900 base was designed to provide the utmost in dialing convenience. Access to most fea-
tures is intended to start with the large, easily accessible keys found on the base. This means that many
features are most easily accessed by first using the hands-free speakerphone, and then lifting the hand-
set from the cradle for handset usage.
Using the Speakerphone (hands free)
I. Press the [SPKR] key. The first available line is automatically selected.
2. Dial the desired number. The dialed digits will appear on the display.
3. At the end of the call, press [SPKR] to hang up.
Using the Handset (preferred)
I. Press the [TALK] key. The first available line is automatically selected.
2. Dial the desired number. The dialed digits will appear on the display.
3. Once the number is dialed, simply lift the handset.
4. At the end of the call, return the handset to the base.
Using the Headset (optional)
I. Lift the handset.
2. Press the [TALK] key.
3. Dial the desired number.
4. At the end of the call, press the [END] key.
Switching from Speakerphone to Handset
If the handset is sitting in the handset cradle (preferred):
I. Begin call using the [SPKR] key.
2. Lift handset, call is automatically transferred to the handset.
If the handset is not sitting in the cradle
I. Begin call using the [SPKR] key.
2. Put call on hold by pressing the [HOLD] key on the base.
3. Press the [LINE] key on the handset for the held call.
26
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #5125C