Insignia NS-H3005 - Manual (Page 23)

21
Insignia NS-H3005 Home Theater System
www.insignia-products.com
• DAILY — for recording up to eight
programs at the same time(s) Monday
through Friday.
22 Press MENU. The program is stored in the
home theater system.
• indicator lights in the display window.
• If the program preset time has past, the
PAST TIME PROGRAMMED message
appears on the television screen. Return
to the incorrect program and program it
with the correct time.
• If you entered a past date, timer recording
will be performed on that date of the next
year.
• Additional programs may be entered by
repeating this procedure.
Program priority
After setting up a
timer recording,
recording will start if
no other timer
recordings overlap
the start time.
If the recording start and end times of preset
programs overlap on the same day, program
number 2 will not be recorded until program
number 1 is finished.
The first part of program number 2 will not be
recorded. The same thing will happen to
program number 3.
Checking or erasing the timer programming
Programming can be checked whenever the
home theater system is turned on.
To check or erase the timer programming:
1 Press MENU. The Main menu appears.
2 Press or to choose PROGRAM.
3 Press MEMORY/ENTER. The Program menu
appears.
4 Press or to select a program you want
to check or erase.
5 To erase the program, press CLEAR.
6 Press MENU to return to the television
screen.
Using Instant Timer Recording
Instant Timer Recording lets you make a
recording easily of a preset length without using
the programmable timer.
To use the instant timer:
1 Turn on the television and home theater
system.
2 Tune the television to the home theater
system output channel (CH 3 or 4) or set the
television’s source selector to VIDEO.
3 Press VCR on the remote or on the front
panel of the home theater system until the
VCR indicator lights in the display window
and the VCR output appears on the television
screen.
4 Insert a video tape with the anti-erasure
safety tab intact.
5 Select the channel with or or number
(0-9). The channel number appears on the
television screen.
-OR-
Press INPUT to select LINE1 or LINE2 if you
are recording from another source using the
audio/video input jacks (at the Back or Front
panel).
6 Press SPEED to select the recording speed
(SP or SLP). The tape speed appears on the
television screen.
7 Press twice. The menu appears on the
television screen and recording starts.
8 Press repeatedly to select the recording
time length.
Tip
If you enter the wrong information, use to
select the incorrect information and correct it using
or .
Note
Cable Users: If your cable hookup is through a
cable converter box, you can program multiple
recordings only on the converter box output
channel. This is because the converter
determines what channel you view through your
home theater system.
Tip
If you are finished programming and you want to
set the home theater system to record the
programs you have entered, MAKE SURE YOU
HAVE INSERTED A TAPE INTO THE home
theater system. The home theater system is now
set to record the preset programs.
Note
• If the power fails or the home theater system is
unplugged from the AC outlet, the correct clock
time and timer settings are kept in memory for
approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when
power is restored. Reset the clock according to
instructions.
• After timer recording is completed, the home
theater system turns off automatically.
• To watch a television program while timer
recording is in progress, select Tuner mode by
pressing TV/VCR repeatedly.
• If you want to stop timer recording which has
already started, press STOP or POWER twice.
Will not be recorded
Program 1
Program 2
Program 3