Intel ATOM US15W - Manual (Page 39)

Quick Start
User’s Manual 39
Document Number: 320264
5 Quick Start
The CRB is configured in a protective chassis. To access to the board with chassis
open, use caution when configuring the hardware and observe proper safety cautions
and warnings. The following sections summarize the necessary hardware and power-
on instructions.
Caution: Always turn off the power and unplug the power cord before entering protective
chassis. The user is required to observe extra precautions when handling and
operating the system.
Note: Review the document provided with the Development Kit titled Important Safety and
Regulatory Information. This document contains addition safety warnings and
cautions.
5.1 Required Peripherals
• DDR2 400- or 533-MHz SDRAM SO-DIMM
• ATX power supply
• Keyboard and mouse
• Hard drive
• Hard drive cable
• Graphics option
Note: PCI Express* and ADD2N (VGA output provided) graphics card “Quick Start” options
are not included in this document.