IDEAL INDUSTRIES 61-320 User Manual
Page 3
Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration procedures
described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The 61-320, 61-322, and 61-324 contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and its products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
Precautions and Safety Information
Use the meter only as described in the Users Manual. If you do not do so, the protection provided
by the meter may be impaired. Read the “Safety Information” page before servicing this product.
In this manual, a Warning identifies conditions and actions that pose hazard(s) to the user; a
Caution identifies conditions and actions that may damage the meter or the test instruments.
The Symbols
The symbols used on the meter and in this manual are explained in Table A.
Table A. The Symbols
Symbol
Meaning
Symbol
Meaning
Alternating signal
Battery
Direct signal
Earth ground
CAT III IEC over voltage Category III
Fuse
Refer to the manual. Important information.
Double insulated
Take appropriate precautions. Hazardous
voltage may be present
Form number TM61320-2-4
Rev 2 September 2002