IBM 4 LINE TELEPHONE WITH CALLER ID -412CID - Manual (Page 35)

35
There may be times when you wish to manually turn off the flashing voice mail indicator. To do this:
1. The phone is in idle mode press [ERASE] key
2. The display will read “Del MW indicator”.
3. Press [ERASE] key to confirm.
4. A short ring will be heard to signal successful programming.
NOTE: The MSG/CALLS LED may still be lit indicating new calls. Once the calls have been viewed (Caller ID
Log) the light will go out entirely.
ACCESSING YOUR VOICE MAIL
1. Dial the number for your voice messaging service. This number will be provided by your local
telephone company when you subscribe to the service.
2. Enter your password.
3. Continue as instructed by your local telephone company.