Intel GA-8IPXDR-E - Manual (Page 12)

1 2
GA-8IPXDR-E(C) Motherboard
0 0 0 0 0 Please make sure the CPU type is supported by the motherboard.
0 0 0 0 0 If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
0 0 0 0 0 Warning: If your are installing one CPU ONLY, please refer to the Motherboard
Layout (page 8) to install the CPU into the certain socket.
For socket 604 / 533MHz
1. Pull the lever out, than lift up the Lever.
Pin1 indicator
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
Socket Actuation Lever
3. Press down the CPU socket lever
and finish CPU installation.
3. Press down the CPU socket lever
and finish CPU installation.