Intel SOCKET 370 CELERON TS-ASP3 - Manual (Page 11)

The JP4 Jumper allows you to set the FSB (Front Side Bus) to 66/100/133MHz configuration.
When the Jumper is set to “Auto”, the freqency range depends on your CPU type. When you set
the FSB to 66MHz, you can select a system bus frequency from 66MHz to 99MHz through “CPU
Host/PCI Clock” of “Frequency/Voltage Control” in the BIOS Setup menu. When you set the
FSB to 100MHz, you can select a system bus frequency from 100MHz to 132MHz. When you set
the FSB to 133MHz, you can select a system bus frequency from 133MHz to 166MHz.
HARDWARE INSTALLATION
7
Transcend
66/100/133MHz FSB Configuration Jumper
6 6 M H z
1 0 0 M H z
1 3 3 M H z
J P 4
A U T O
B U S _ F r e q
2.3.1 66/100/133 MHz System Configuration
2.3 Jumper Setup