Bios setup – Intel SOCKET 370 CELERON TS-ASP3 User Manual
Page 42
•
•
•
•
•
Parallel Port Mode
This field allows you to set the operation mode of the parallel port.
- SPP: Allows normal-speed operation, but in one direction only.
- EPP: Allows bi-directional parallel port operation at maximum speed.
- ECP: Allows DMA and bi-directional operation. It is faster than EPP mode.
- ECP + EPP: Allows normal speed operation in two-way mode.
•
•
•
•
•
EPP Mode Select
Select EPP port type “1.7” or “1.9”.
•
•
•
•
•
ECP Mode Use DMA
Assign DMA channel “1” or “3” to the port for ECP mode operation.
•
•
•
•
•
PWR-ON After PWR-Fail
Choose if you want the system to automatically Power On after the power has failed.
- Off: Disable this function
- On: Enable this function
- Former-Sts: Not only Power On the system, but also to return it to its former status.
•
•
•
•
•
Game Port Address
Set Joystick Game Port Address. The choices are: “Disabled”, “201” and “209”.
•
•
•
•
•
Midi Port Address
Set Midi Port Address. The choices are: “Disabled”, “330”, “300” and ”290”.
•
•
•
•
•
Midi Port IRQ
Assign IRQ 5 or 10 to the Midi Port.
38
BIOS SETUP
•
•
•
•
•
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer) port.
The choices are: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
•
•
•
•
•
Use IR Pins
This option selects IR transmission routing. Two choices are:
RxD2,TxD2 -> COMB Connector
IR-Rx2Tx2 -> IR Connector