Intel SOCKET 370 CELERON TS-ASP3 - Manual (Page 17)

HARDWARE INSTALLATION
13
2.4.2 Floppy Disk Drive Connector (34-pin FDC)
This connector supports the floppy disk drive ribbon cable which is one of the items in your
motherboard package. After connecting the single end to the board, connect the two plugs at the
other end to the floppy drive(s). Remember, as in the last section, the red stripe on the edge of
the ribbon cable must be the nearest to PIN1 or your connection won’t work. PIN1 is on the left as
shown below.
Floppy Disk Drive Connector
P I N 1
F D C
Floppy Disk Drive Connector
Transcend