Bios setup – Intel SOCKET 370 CELERON TS-ASP3 User Manual
Page 41
BIOS SETUP
37
- Any Key: Press any key to Power On the system.
- Button only: Power On only by pushing the button on the case (Default).
- Keyboard 98: You can Power On system by pushing the [Power-On] key of Keyboard 98.
•
•
•
•
•
KB Power On Password
Enter the Power On Passward here. Activated only when “Password” item is selected
in the Power On Function Menu.
NOTE: If you want to use this function, please make sure that the “KB-AWK” jumper
is set to “Enabled”.
•
•
•
•
•
Hot Key Power On
Choose [CTRL] +[ F1] ~ [F12] as a hot key to Power On the system. Activated only when
“Hot Key” is selected on the Power On Function Menu.
•
•
•
•
•
Onboard FDC Controller
You can use this function to enable or disable the onboard FDC controller.
•
•
•
•
•
Onboard Serial Port 1/Port 2
Select an address and the corresponding interrupt for each of the first and second serial
ports. The choices are: “Disabled”, “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2F8/IRQ3”, and
“Auto”.
The second serial port shares the resources (address and IRQ) with IrDA.
•
•
•
•
•
UART Mode Select
Choose the right type of infrared device:
- Normal: Normal operation
- IrDA: IrDA compliant serial infrared port
- ASKIR: Amplitude Shift Keyed Infrared Port
•
•
•
•
•
RxD, TxD Active
Consult your IR peripheral documentation to select the combination of RxD and TxD.
•
•
•
•
•
IR Transmission Delay
Consult your IR peripheral documentation to select “Enabled” or “Disabled” for the IR
Transmission Delay.
•
•
•
•
•
UR2 Duplex Mode
This item allows you to select the IR half/full duplex function.