Invacare Top End Terminator Jr. - Manual (Page 16)

16
INSTALLING THE STROLLER
HANDLES (FIGURE 8)
NOTE: If necessary, remove the foam grip on the push
handle BEFORE performing this procedure.
1. Slide the stroller handle onto the push handle.
2. Make sure to line up the mounting holes of the
stroller handle and the push handle.
3. Press and hold the button on the quick-release
pin.
4. While holding the button, insert the quick-release
pin through the stroller handle and push handle.
5. Pull on the stroller handle to make sure it is locked
securely in place.
6. Repeat STEPS 1-5 for the opposite stroller handle.
B
A
C
K
Push
Handle
Stroller
Handle
Quick-Release Pin
Button
FIGURE 8 - INSTALLING THE STROLLER HANDLES
BACK PROCEDURE 4