IBM NETVISTA X40 6643 - Manual (Page 48)

Viewing and changing settings
The Configuration/Setup Utility menu displayed by your computer might look
slightly different from the menu shown here, but it will operate the same way.
Configuration/Setup Utility
Select Option:
v System Summary
v Product Data
v Devices and I/O Ports
v Start Options
v Date and Time
v Advanced Setup
v System Security
v Power Management
Save Settings
Restore Settings
Load Default Settings
Exit
The Configuration/Setup Utility program menu lists items that identify system
configuration topics. You might see symbols next to configuration menu items.
The following table explains these symbols.
v An additional submenu or screen is available
A change to that item has been made in the system configuration, or
the Configuration/Setup Utility program has detected an error and
attempted to correct it. Also, an additional menu might follow a menu
item with a
beside it.
* A system resource conflict was detected. Resolve this conflict before
exiting from the Configuration/Setup Utility program so that your
computer will function properly.
[ ] In the program menus, the Configuration/Setup Utility on
information you can change is enclosed in brackets like these. You
cannot change information that is not enclosed in brackets.
When working with the Configuration/Setup Utility program menu, you must
use the keyboard. The following table shows the keys used to accomplish
various tasks.
32 User Guide