Impulse PCW-5181 - Manual (Page 109)

Appendix B - Impulse Advanced Programming
B-11
EEPROM Enable Switch
Description: Determines if parameter writes are updated to the EEPROM or are only altered in
RAM. If EEPROM is disabled, all parameter changes are lost on power cycle or system reset.
Parameter Parameter Description Default Value
EE_Enable EEPROM Enable Value 1 (1h)
Index Parameter Description
115 EE_Enable
Transmission Frame
Unit Address 115 EE_Enable
LSB
EE_Enable
MSB
CkSum
LSB
CkSum
MSB
Formulas
Index
Parameters
& Defaults
Parameter Formula
EE_Enable EE_Enable = 0 EEPROM Disabled (Parameter changes are written to RAM only)
EE_Enable = 1 EEPROM Enabled (Parameter changes are written to EEPROM)