Interquartz 9859 - Manual (Page 27)

27
STORAGE PROCEDURE
* Press STORE
* Enter the desired number on the Alpha-Numeric Keypad (32 digits maximum)
* The number you have entered will be display on the screen
* If you have made an error the cursor keys and may be used to edit the
entry
* If the number is correct press the STORE key
* A screen prompt will ask you to ENTER NAME
* Enter the name using the Alpha-Numeric keypad
e.g to enter DANNY
* Press 3 key once (D)
* Press 2 key once (A)
* Press 6 key twice (N)
* Press to move the cursor one space
* Press 6 key twice (N)
* Press 9 key three times (Y)
* To complete the process press the desired memory key once for a one-touch
memory location or twice for a two-touch memory location
A 'BEEP' and a screen prompt 'STORE COMPLETE' will let you know the entry
was accepted
A 'BOOP' will tell you to try again
Only when ALL enteries have been correctly should the mode 2 setting be
selected
SELECTING MODE 2
To select mode 2
* Disconnect line cord and power pack (if used) remove plastic cover and
memory cord from keypad area (see fig 2)
* Locate the memory mode selection switch (see fig 2)
* Select mode 2