Interquartz 9859 - Manual (Page 33)

33
to difficulty in making outgoing external calls. If you have determined that a
pause is required by your PABX or switchboard, please consult the following
sections of this manual to select the best alternative :
* PAUSE BUTTON
* AUTOMATIC PAUSE INSERTION
Holding and Transferring Calls
The method used for these functions is dependent on your system type, so
you will need to check the system's Extension User Guide. The PBX RECALL
button is provided to make these functions possible in the easiest an most
convenient way. The related adjustment switches described in the INSTALLA-
TION section of this manual must be correctly set to suit your system for
correct operation. Please also refer to the PBX RECALL BUTTON section for
detailed instructions.
*AND # BUTTONS
These may be used, when the TONE / PULSE switch is set to TONE position
or if the TONE BUTTON has been pressed during the call, to control special
PABX and exchange facilities. Consult your PABX or Telstra User Guide to as
certain their use.
10. GENERAL CARE AND MAINTENANCE
This telephone is a precision electronic instrument. While in use and storage,
care should be taken to avoid rough handling, extreme temperature, and damp
or dirty environments.
CLEANING
NEVER use aerosol sprays or other chemical agents or substances which
leave a redisue (furniture polish for example).
Use a mild detergent and a damp, clean cloth when cleaning. Do not allow
moisture to enter the telephone's interior-damage may result!