Interquartz 9859 - Manual (Page 31)

31
must be set to HS (see installation section). A headset mic adjustment allows
most headsets on the Australian market to function correctly when used with
the IDea telephone (see installation section)
Incoming call using a HEADSET
1. telephone rings
2. press handsfree / HEADSET
3. commence your HEADSET conversation
Changing from HEADSET to HANDSET During a call
Lift the HANDSET and resume your conversation, the HEADSET function will
switch off automatically.
Changing from HANDSET to HEADSET During a call
1. press handsfree/HEADSET
2. replace HANDSET
3. resume your conversation using the HEADSET
Outgoing call using a HEADSET
1. press handsfree/HEADSET
2. dial required number on the ALPHA-NUMERIC keypad or press derided
MEMORY key.
3. speak us required
or
1. dial required number on the ALPHA-NUMERIC keypad or press desired
MEMORY key
2. press handsfree/HEADSET
3. speak as required
Volume Slider
Adjusts the volume of the HEADSET earpiece.
TRAINEE / SUPERVISOR MODE
Allows for the HANDSET and a HEADSET to be used in tandem. This will
enable a supervisor to monitor a trainee's progress during a call, or 'take
over' call. The following procedure s assume that the trainee is wearing the
HEADSET and a call is in progress.