IBM N2800e - Manual (Page 61)

Appendix C. Setting the thin client voltage for your location
Selecting the voltage for your location:
Note:
All N2800e thin clients are preset to the 230V setting
when manufactured.
1. Power off the N2800e thin client.
2. Remove the base from the N2800e thin client.
3. Locate the voltage selector switch
A .
4. Use a pen, or similar object, to slide the switch to the
correct setting for your location (see Voltage selection in
Table 11 on page 42).
5. Slide the base back on to the N2800e thin client.
6. Power on the N2800e thin client.
© Copyright IBM Corp. 2000 51