Intel 1300 - Manual (Page 57)

57
Link LED does not light
Check the following:
• Make sure you've loaded the network drivers.
• Check all cable connections.
• Make sure the network cable is connected to the port marked "Adapter 1"
on the back of the appliance.
• Make sure you have the correct type of cable between the adapter and the
hub. Some hubs require a crossover cable while others require a straight
through cable (for more information on crossover cabling, see your hub
documentation).
Activity LED does not light
Check the following:
• Make sure you’ve loaded the correct network drivers.
• Network may be idle. Try accessing a appliance.
The appliance sends a fan alert
If you receive a fan alert from the appliance, save your current work, shut down
the appliance, then turn it back on.
The appliance sends a temperature alert
Try the following:
• Shut down the appliance off and let it cool down.
• Lower the room temperature or relocate the appliance to a cooler location.
• Provide adequate ventilation around the appliance.
The appliance sends a voltage alert
Try the following:
1. Save your current work, then shut down the appliance.
2. Install a surge protector or a UPS with surge protection.
3. Turn on the appliance.