Interquartz 98583 User Manual
Page 11
10
Ringer pitch control
Located on the base of the unit ( see Figure 2 ). Rotating this knob alters
the pitch of the ringing signal. Ideal where there is more than one phone in a
room.
Volume slider
Adjusts the volume of the on-hook dial / handsfree speaker.
Tone / Pulse switch
Located on the base of the unit ( see Figure 2 ). Used to select the correct
dialling mode, either TONE or PULSE. If you have any doubt about the system
supplied to your phone, contact your Network Supplier and they will advise
you.
Reset button
It is unlikely that you will need to use this button.
The button is located under the memory number overlay for the five, top,
memory buttons, Figure 1. If the telephone appears not to function, for any
reason, pressing this button will reset the telephone to normal operation.
Note :
any stored memories will be lost and must be re-entered.