Interquartz 98583 - Manual (Page 13)

12
Speakerphone dialling
The speakerphone can be used for manual dialling in much the same way
as the off-hook dialling method :
- Press the speakerphone button and the dial tone will be heard in the
speaker.
- Dial the required number on the keypad
- When the called party answers the phone, continue to speak using the
microphone in the telephone or pick up the handset, if you so wish. With
the handset in use it is possible to revert to speakerphone use by pressing
the speakerphone button BEFORE replacing the handset.
NOTE : if using the handset and the speakerphone button is pressed to
revert to speakerphone operation, both the handset and the
speakerphone microphones are muted until the handset is replaced.
- The call is terminated by replacing the handset on the cradle or by pressing
the Speakerphone button.
The telephone will continue to ring an unanswered number until the call is
terminated by pressing the speakerphone button.
Memory dialling
The ten single touch memory buttons are simply pressed once to access the
memory stored behind the button.
With the five one- and two-touch memories, the button is pressed once to
access the " first page " and twice in quick succession, to access the " second
page ".
It is possible to store just telephone numbers in the memories but you can
make speed dialled calls directly from the memory, by storing facility codes
(see below).