Interquartz 98583 - Manual (Page 16)

15
Cascade dialling
It is possible to dial a number that is contained in more than one memory
location or for which you want to dial part of the number manually.
e.g. for a very long number split between memory locations 1 and 2
- obtain a dial tone
- press memory button 1
- press memory button 2
the telephone will now dial a number consisting of the contents of both memory
1 and memory 2
Mixed dialling
It is possible, if your telephone is connected to a pulse exchange, to carry
out mixed mode dialling. If you have a tone exchange, mixed dialling is not
necessary.
Access to home banking facilities, to computers and to some remote
answering machines requires the use of tones rather than pulse dialled
numbers.
To initiate a mixed mode dialled number :
- dial the first part of the number ( in pulse, because this is how your telephone
set will be switched - see Section 3 )
- press the tone button (a pause of 3.6 seconds will be automatically inserted)
and dial the remainder of the number. This will now be sent out in tone
format.
- at the end of the call replace the handset or press the speakerphone button.
The telephone will revert to normal pulse dialling format.