Icom iM304 - Manual (Page 25)

19
6
DSC OPERATION
6
r Push [DSC] to enter the standby condition for Individual
acknowledgement call.
• “ ” appears at the channel comment indicator.
t Push [DSC] to transmit the acknowledgement to the se-
lected station.
y After the Individual acknowledgement has been transmit-
ted, the display changes to the channel specified by the
calling station automatically when “
” is selected.
D Transmitting Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q Push [DSC] to enter the DSC menu.
w Push [Y] or [Z] to select “
,” and push [DSC].
e Push [Y] or [Z] to select the desired pre-programmed
group address, and push [DSC].
• The ID code for the group call must be set in advance. (p. 14)
Scrolls