Icom iM304 - Manual (Page 33)

27
6
DSC OPERATION
6
D Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is
received:
➥ “DSC” appears and “
” scrolls at the chan-
nel comment indicator.
➥ Push any key to stop the beep, then push [DSC] to reply to
the call; push any other key to ignore the call.
D Receiving a Position Report call
While monitoring Channel 70 and a Position Report call is re-
ceived:
➥ “DSC” appears and “
” scrolls at the chan-
nel comment indicator.
➥ Push any key to stop the beep, then push [DSC] to reply to
the call; push any other key to ignore the call.
• The ‘Latitude’ and ‘Longitude’ from the called station is displayed
and scrolled automatically in order of Latitude co-ordinates and
then Longitude co-ordinates after replying the call.
D Receiving a Position Reply call
While monitoring Channel 70 and a Position Reply call is re-
ceived:
➥ “DSC” and “POS REPLY” appear in the display.
• The ‘Latitude’ and ‘Longitude’ from the called station is displayed
and scrolled automatically in order of Latitude co-ordinates and
then Longitude co-ordinates.
➥ Push any key to stop the beep.
D Receiving a Position Report Reply call
While monitoring Channel 70 and a Position Report Reply call
is received:
➥ “DSC” and “POS REPLY” appear in the display.
• The ‘Latitude’ and ‘Longitude’ you have sent is displayed and
scrolled automatically in order of Latitude co-ordinates and then
Longitude co-ordinates.
➥ Push any key to stop the beep.
Scrolls
Scrolls
Scrolls
Scrolls