Icom iM304 - Manual (Page 34)

28
SET MODE
7
■ Set mode programming
Set mode is used to change the conditions of the trans-
ceiver’s functions: Scan type (Normal or Priority,) Scan re-
sume timer, Weather alert, Dual/Tri-watch, DSC watch, Beep
tone, Auto acknowledgement and Favorite channel function.
Available functions may differ depending on dealer setting.
D Set mode operation
q Turn power OFF.
w While pushing [
!6], turn power ON to enter Set mode.
e After the display appears, release [ !6].
• “ ” appears at the channel comment indicator.
r Push [ !6] to select the desired item, if necessary.
t Push [Y] or [Z] to select the desired condition of the item.
y Turn power OFF, then ON again to exit Set mode.
• Beep tone
Starting item
• Scan type • Scan resume timer • Weather alert • Dual/Tri-watch
• DSC watch • Auto acknowledgement
Scrolls
• Favorite channel function
Scrolls Scrolls
Push
D Set mode construction