Icom iM304 - Manual (Page 36)

30
7
SET MODE
D D DSC watch
DSC watch monitors Channel 70 while you are receiving an-
other channel.
If a distress signal is received on Channel 70, the transceiver
monitors Channel 16 and 70 alternately until the distress sig-
nal disappears. If a signal is received on another channel,
DSC watch pauses until the signal disappears.
This function may not be available for some channel
groups depending on dealer setting.
• “ ” scrolls at the channel comment indicator.
D D Beep tone
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a key
by turning beep tones ON.
D D Automatic acknowledgement
This item sets the Automatic acknowledgement function ON
or OFF.
When Position Request call or Position Report call is re-
ceived, transceiver automatically transmits Position Request
Reply call or Position Report Reply call, respectively.
• “ ” scrolls at the channel comment indicator.
D D Favorite channel
This item sets the Favorite channel function ON or OFF.
The favorite channel is programmed by the TAG channel set-
ting (p. 11).
When the Favorite channel function is turned ON, [Y
Y]/[Z Z]
keys on the microphone select the favorite channels in the
selected channel group in sequence when pushed.
•
“ ” scrolls at the channel comment indicator.
Favorite CH ON (default) Favorite CH OFF
Auto acknowledgement
OFF (default)
Auto acknowledgement
ON
Beep tone ON (default) Beep tone OFF
DSC watch OFF (default) DSC watch ON