Iiyama MA203DT D - Manual (Page 12)

ENGLISH
ADJUSTMENT MENU CONTENTS
Main Menu Sub-Menu
Too dull
Too intense
Too dark
Too bright
NOTE
Color
Control
Problem / Option Button to Press
Color temperature is adjustable sRGB and between approximately
10000K and 4500K. The factory preset is 9300K.
Color temperature is fixed to the factory preset 9300K while the OPQ
function is active.
Return to Menu Return to Main Menu.
Contrast
Brightness
Color Temp.
COLOR
Reddish white
Bluish white
You can skip the Menu pages and display an adjustment scale directly by using the following
button operations.
l Contrast: Press the +/– Buttons when the Menu is not displayed.
l Brightness: Press the +/– Buttons and then the Menu Button continuously when the
Menu is not displayed.
SWITCHING CONTRAST / BRIGHTNESS ADJUSTMENT
To switch between Contrast and Brightness adjustments, press the Menu Button
within 2 seconds after pressing the +/– Buttons during the direct adjustments above.
NOTE
The On Screen Display disappears approx. 3 seconds after you stop pressing the
buttons while performing the direct adjustment, irrespective of OSD Off Timer setting.
(See page 11 for OSD Off Timer.) n
Direct
Direct
Direct
n
n
sRGB
Procedure
n To access the sRGB mode, select the Color Temp. function and select 10000K by
pushing the + button. Hold down the + button and sRGB function will be activated.
When this mode is activated the color temperature is approximately 6500K.
n To deactivate the sRGB mode, push the – button while the Color Temp. is selected.
n sRGB is an international standard which defines and unifies the
difference of color appearance between equipment.
n You can not adjust the Contrast and Brightness during sRGB mode
because those settings are locked.
NOTE
n
9 OPERATING THE MONITOR