Iiyama MA203DT D - Manual (Page 6)

ENGLISH
NOTE If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging. n
3 FOR YOUR SAFETY
n
CUSTOMER SERVICE
CLEANING
CABINET
CRT
WARNING
CAUTION
NOTE
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Wipe the CRT with an enclosed cleaning cloth to remove smudges (such as
fingerprints). Tough stains can be removed with a cloth lightly moistened with water
or mild detergent diluted by 10%. Make sure to wipe the CRT surface using a sideling
movement.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it. n
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service
center. n
The CRT screen is protected by an anti-reflection & anti-static coating. Do not scratch or
rub the screen with a hard object, as this could damage the coating. n
Never use any of the following strong solvents. These will damage the cabinet and
the CRT. n
Thinner
Benzine
Abrasive cleaner
Solvent for cleaning glass
Solvent with anti-static agent Spray-type cleaner
Wax
Acid or Alkaline solvent
Alcohol solvent
OTHERS
UNSUITABLE LOCATION FOR USING THE MONITOR
The monitor is not suitable for use in the presence of a FLAMMABLE ANAESTHETIC MIXTURE WITH
AIR or WITH OXYGEN OR NITROUS OXIDE.
The monitor is not suitable for use in areas that patients are cared for. This encloses a space
within the room 1.83 m (6 feet) beyond the perimeter of the bed (examination table, dental chair,
treatment booth, and the like) in its intended location, and extending vertically 2.29 m (7-1/2 feet)
above the floor.