Enjoying music or videos with the dtr-7.2, Listening with headphones, Adjusting the bass and treble – Integra DTR-7.2 User Manual

Page 50: Temporarily turning off the sound, Basic operation, Digital

Advertising
background image

50

Enjoying music or videos with the DTR-7.2

Though the DTR-7.2 is often used to listen to the radio, it does not
show you its true ability until it is used to play music or watch
videos, DVDs, and the like. The DTR-7.2 has the latest in state-of-
the-art features to play back today’s acoustic technologies with the
utmost in fidelity and power. From a two-speaker system to a seven-
speaker system, you are assured a sound space that you can always
enjoy.

Listening with headphones

To listen with headphones, plug a pair of headphones with a standard
stereo plug into the Phones jack on the DTR-7.2 front panel.
When you connect headphones, the unit will enter Stereo mode
automatically and no sound will be heard from the speakers.
When the headphones are unplugged, the DTR-7.2 returns to its
original listening mode.
When using the headphones, you can only use the Direct, Stereo, and
Mono listening modes.
If you have selected MULTI CH INPUT, you will hear sound only
from the FRONT L and R channels.
The headphone volume level can be adjusted at the Setup menu (see
page 47).
Note that the signal to the remote zone (Zone 2) will not be affected
whether or not headphones are connected.

Adjusting the bass and treble

You can adjust the bass and treble levels at the Setup menu:Audio
Adjust

→ Tone Control. This function only affects the front left and

right speakers, center speaker, and subwoofer. Only the bass level
can be adjusted for the subwoofer (the treble adjustment is not
effective). However, these adjustments cannot be made if the
listening mode is set to Direct.

Temporarily turning off the sound

To turn off the sound momentarily, such as when interrupted by a
phone call, press the MUTING button on the remote controller.
When pressed, “Muting” is displayed on the DTR-7.2. Press the
MUTING button again to turn the sound back on.

Basic operation

To use the remote controller, first press the RCVR button.

1. Press the input source (or input selector on the

remote controller) button.

Remote controller

2. Turn on the corresponding component and play the

media.

3. Adjust the volume.

DTR-7.2

Remote controller

Adjusting the main volume adjusts the volume level output from
all the speakers connected to the DTR-7.2 together. If
headphones are connected, this also adjusts the volume heard
from the headphone speakers. To adjust the volume, either press
the VOL

buttons on the remote controller or turn the Master

Volume dial. To increase the volume, turn the dial clockwise; to
decrease the volume, turn the dial counterclockwise. The
volume can be set to Min, 1 to 99, and Max (or –

∞, –81 to +18

dB).

DTR-7.2

Remote controller

HOME THEATER CONTROLLER

RC-461M

Master Volume

Standby/On

Power

On

O f f

psampling

U

Audio

Selector

Tape

FM

AM

Phono

CD

Digital

Video 1

VCR 1

Video 3

Video 2

VCR 2

Video 4

Video 5

DVD

Zone

2 (

)

GRN

Rec (

)

RED

A-FO RM Listening Mode Memory

Video 5 / Video Cam Input

Stereo

Direct

DSP

Surround

THX

Clear

FM Mode

Memory

Rec Out

Zone 2

Of f

Dimmer

Display

S Video

Audio

Video

L

R

Phones

Standby

Enter

Return

Se tup

Preset

Tun ing

Phones

Input source buttons

Master Volume

VOL

MUTING

INPUT
SELECTOR
buttons

RCVR

FM

AM

Phono

C D

Tape

DVD

Video

3

Video

5

Video

4

Video

2

Video

1

VCR

2

VCR

1

Master Volume

Audio

Selector

D

Zone

2 (

)

GRN

Rec (

)

RED

Phones

Advertising