Integra DTR-7.2 - Manual (Page 51)

51
Changing the listening mode
To change the listening mode during playback, press the listening
mode buttons.
The functions of the buttons on the DTR-7.2 and those on the remote
controller are the same.
Direct (DIRECT): Changes the listening mode directly to the
Direct listening mode. If pressed, the listening mode for the selected
input source set in the Listening Mode Preset is also changed to the
Direct listening mode.
Stereo (STEREO): Changes the listening mode directly to the
Stereo listening mode. If pressed, the listening mode for the selected
input source set in the Listening Mode Preset sub-menu is also
changed to the Stereo listening mode.
Surround (SURR): Changes the listening mode to the surround
mode for the current input signal (e.g., Dolby Pro Logic II, Dolby
Digital, or DTS). If pressed, the listening mode for the selected input
source set in the Listening Mode Preset is also changed to the
Surround listening mode.
When the Surround listening mode is selected
• When playing back DTS sources
Switches the DTS-ES setting from Auto → On → Off.
• When playing back Analog/PCM sources
Switches from Pro Logic II Movie
→ Pro Logic II Music →
DTS Neo6:Cinema
→ DTS Neo6:Music.
• When playing back D.F. 2-channel sources
Switches from Pro Logic II Movie
→ Pro Logic II Music.
THX: Changes the listening mode to the THX listening mode.
When the THX listening mode is selected
• When playing back Dolby Digital sources
Switches the THX Surround EX mode (Auto
→ On → Off) if the
source is a Dolby Digital-compatible source.
• When playing back Analog/PCM sources
Switches the decoding mode (Pro Logic II Movie
→ DTS
Neo6:Cinema) for THX processing.
• When playing back DTS sources
Allows you to enjoy the DTS THX Cinema, DTS-ES Discrete 6.1
THX Cinema, and DTS-ES Matrix 6.1 THX Cinema surround
systems. The DTS-ES mode changes from Auto
→ On → Off.
DTR-7.2 Remote controller
Enjoying music or videos with the DTR-7.2
HOME THEATER CONTROLLER RC-461M
Master Volume Standby/On
Power
On O f f
psampling U
Audio Selector Tape FM AM Phono CD
Digital
Video 1
VCR 1
Video 3 Video 2
VCR 2
Video 4 Video 5 DVD Zone 2 ( ) GRN Rec ( ) RED
A-FO RM Listening Mode Memory
Video 5 / Video Cam Input
Stereo Direct DSP Surround THX
Clear
FM Mode Memory
Rec Out Zone 2 Of f Dimmer Display
S Video Audio Video L R
Phones
Standby
Enter
Return
Se tup
Preset
Tun ing
Direct
Listening mode buttons
Setup Enter
Return Input source buttons
/
/ Listening
mode
buttons
DSP Direct Stereo Surround THX
Entering names for input sources and tuner stations
You can enter names for your components or radio station names as
names for your input sources and have them displayed in the front
panel display when that input source is selected (see page 37).
Entering characters using the DTR-7.2:
1. Press the Setup button.
2. Press the button to select the “2.Input Setup” menu and
press the Enter button.
3. Press the button to select the “Character Input?” sub-
menu and press the Enter button.
4. Press the button to select “Char: ” and press the button.
5. The screen changes to show you the characters you have
already entered (< >) and then automatically changes to the
Character Selection screen (ABCDEF...).
Press the , , , and buttons to select the character you
desire and press the Enter button. The screen again shows you
the characters entered for approximately two seconds and
returns you to the Character Selection screen.
If you enter an incorrect character, press the Return button to
move the cursor to the left and re-enter the character.
Repeat the above operations to enter up to 10 characters. When
you are finished, the entered name appears.
6. Press the Setup button to complete the procedure.
To correct entered characters
Perform steps 1 to 4 given above. After performing step 4, press the
button to display a name that has already been entered. Press the
Enter button to move the cursor to the location of the character that
you want to change, enter the new character, and press the Enter
button.
To delete an entered name
Perform the steps 1 to 3 given above. At step 4, press the button.
If surround back speakers are not connected, you cannot select THX
Surround EX, DTS-ES Discrete 6.1, or DTS-ES Matrix 6.1.
DSP / : Changes the listening mode as shown below.
Mono
→ Direct → Stereo → Theater-Dimensional → Surround* →
THX* → Mono Movie → Enhanced 7 → Orchestra → Unplugged
→ Studio-Mix → TV Logic → All Ch Stereo → Mono.
If pressed, the listening mode for the selected input source set in the
Listening Mode Preset is also changed.
* The display will differ depending on the format of the current
signal.