Chapter 3. software installation, Chapter 3. software installation” on – IBM 16/4 Token-Ring User Manual

Page 15

Advertising
background image

Chapter 3. Software installation

This chapter describes how to install the driver software for your token-ring adapter.
To install the software, perform the following procedures:

1. Get the latest level of LAN driver updates for your operating system to ensure

that your code is at the latest level.

2. Make sure that your adapter has already been installed in your computer. If it

has not, follow the instructions in “Chapter 2. Installing the adapter hardware” on
page 5.

3. Get the driver for your environment. There are three places to find the driver.

We recommend the first one listed here. All three methods will place the driver
in a directory according to the structure in Table 2 on page 8.
v Method A: Get the driver from a software package on the IBM Networking

Web site. This will ensure that you get the latest driver.

a. Go to x:\startcd.htm (where x is your CD-ROM drive).

b. Select your adapter from the section IBM Networking Web site - current

information.

c. Select Downloads and select the appropriate software package for your

environment.

d. Run the package to expand the files. The driver will be placed in the

directory listed in Table 2 on page 8.

Note: You can also access the Web site directly at

http://www.ibm.com/networking/support.

v Method B: Use the driver shipped on this CD-ROM directly with your network

operating system’s installation software. Note the directory containing the
driver (see Table 2 on page 8).

v Method C: Get the driver from a software package shipped on this CD-ROM.

a. Go to x:\startcd.htm (where x is your CD-ROM drive).

b. Select your adapter from the section CD-ROM - release date information.

c. Select Downloads and choose the appropriate software package for your

environment.

d. Execute the package to expand the files. The driver will be placed in the

directory listed in Table 2 on page 8.

4. Install the driver. Use Table 3 on page 9 to find the location of the installation

instructions for your environment. We recommend that you install the latest
service pack for your operating environment before installing the adapter
software.

© Copyright IBM Corp. 2000

7

Advertising