IBM 16/4 Token-Ring - Manual (Page 25)

3. Add, delete, or modify drivers as needed.
v To add a driver:
a. In the Options box, select Modify.
b. Select the driver and press Enter.
c. Press Insert to select from a list of drivers provided with NetWare.
d. Press Insert again to install a driver from diskette.
v To delete a driver:
a. In the Options box, select Modify.
b. Select the driver and press Enter.
c. Select the driver to delete and press Delete.
v To modify a driver:
a. In the Options box, select Modify.
b. Select the driver and press Enter.
c. Select the driver to modify and press Enter.
d. Select the property to modify.
Server driver installation in existing NetWare 5.0 Server
The following procedure explains how to use NWCONFIG to load a LAN driver and
bind a protocol.
1. Create a diskette containing the extracted files from the NETWAREP.EXE
package file on the adapter CD-ROM.
2. At the server console prompt, enter NWCONFIG.
3. Select Driver Options
→ Configure network drivers.
4. To select the driver from all of the available drivers, select Select a driver. The
screen will display a list of all available drivers.
5. Press Insert. Follow the instructions on the panels. Use the diskette that you
created in step 1 when you are prompted to supply an unlisted driver. The
directory is a:\novell\netware.
Chapter 3. Software installation 17