Intel 537EX - Manual (Page 62)

62 536EX Chipset Developer’s Manual
Intel Confidential
Error Correction and Data Compression
+ER=m 0
Error Control Reporting: Controls whether the “+ER:” result code is transmitted from the DCE to the
DTE once a connection has been made. If enabled the result code displayed shall represent the current
negotiated DCE-DCE error control type and is issued after the Modulation Report (+MCR and +MRR) and
before the final result code Data Compression Report (+DR:). +ER accepts one numeric parameter
decimal value and the format is as follows:
0 Disables error control reporting (no +ER intermediate result code transmitted)
1 Enables error control reporting (+ER intermediate result code transmitted)
Display messages when +ER = 1,
+ER: LAPM V42 LAPM protocol in use
+ER: MNP 2 MNP 2 protocol in use
+ER: MNP 2 4 MNP 2 and 4 protocol in use
+ER: MNP 3 MNP 3 protocol in use
+ER: MNP 3 4 MNP 3 and 4 protocol in use
Example if +ER = 1
+ER: LAPM
Table 21. V.44/V.42/V.42 bis and MNP Data Modem Command Descriptions (Continued)
Command Default Description
NOTE: An asterisk (*) denotes the factory-default setting.