Intelligent Motion Systems MDO17 - Manual (Page 6)

ORDER INFORMATION
Control Knob
The MDrive17 is available with a fac to ry-mount ed rear
control knob for man u al shaft positioning.
Planetary Gearbox
Effi cient, low maintenance Planetary Gearbox are of-
fered assembled with the MDrive17. Details inside.
Encoder
The MDrive17 is available with a factory-mount
ed
op ti cal en cod er. Available line counts are 100, 200,
250, 400, 500 or 1000. All en
cod ers, except
1000 line, have an in dex mark. Encoders are avail-
able in both single-end and dif fer en tial confi gurations.
Order optional Encoder Cables separately:
Single-end Cable (12"/30.5cm) ..... ES-CABLE-2
Differential Cable (36"/91.5cm)..... ED-CABLE-2
Linear Actuator
The MDrive17 with long life Acme Screw Linear Actua-
MDRIVE17 SPEED CONTROL – OPTIONS
tor is avail able with the following trav el/full step:
Screw A .............. 0.00125”/full step
Screw B .............. 0.000625”/full step
Screw C .............. 0.0003125”/full step
Screw D .............. 0.00015625”/full step
Standard screw length is 6.0” (152.4mm) plus the
mounting end thread. Cus tom lengths from 2.0” to
24.0” are available without mounting end thread.
Linear Actuators are Non-Captive style. Contact the
factory regarding Captive Shaft or External styles.
Parameter Setup Cable
A low cost ac ces so ry which eliminates the need for
users to wire com mu ni ca tions. This 6' (1.8m) cable
includes built-in logic level shifting circuitry to ac com -
mo date the 3.3v ports on some PCs and plugs in
easily to con nect a stan dard DB-25 PC par al lel/SPI
port to the MDrive's 10 pin pin-header (P2). Order
Cable Part No. MD-CC100-000.
† Linear Actuator Available ONLY in Stack Size 13. (MDOX1713LX)
MDO 17
Stack Sizes
13 = Single Stack & Linear Actuator
15 = Double Stack
19 = Triple Stack
†
MDRIVE17 SPEED CONTROL
Example #1: Part Number MDOP1719 is an MDrive17 Speed
C
Ontrol with Pluggable Interface, NEMA 17 motor, stack size 19.
OPTION
Interface Options
F = 12” Flying Leads
P = Pluggable Clamp
Type Terminal Strip
C = 0.0003125”
B = 0.000625”
A = 0.00125”
D = 0.00015625”
N
S = Single End
D = Differential Line Counts: 100, 200,
250, 400, 500, 1000
L
E
Screw Type (Travel/Full Step)
Encoder
Control
Knob
Linear
Actuator†
OPTIONS
Example #4: MDOP1719ED500
Adds a 500 line count Differential Encoder
to the part shown in example #1.
Example #2: MDOP1719N
Adds a Control Knob
to the part shown in example #1.
Example #5: MDOP1713LC10.5
MDrive17 Speed Control Linear Actuator
with a 0.0003125”/Full Step Acme
Screw custom cut to 10.5”.
MAY NOT be combined with other options.
Note: MDrive17 Linear Actuator
Available ONLY in Stack Size 13
Custom Screw Length
Range 2.0” to 24.0”
Format XX.X
eg. 08.5 for an 8.5” Screw
(6.0” Screw Length Standard)
G Planetary
Gearbox
Example #3: MDOP1719G5
Rounding ratio to the nearest whole number,
the above adds a Planetary Gearbox with
5.18:1 ratio to the part shown in example #1.
Add -F if optional NEMA Flange is desired.
Gearbox Ratio
Rounded to Nearest Whole Number
© 2002, 2004 Intelligent Motion Systems, Inc. All Rights Reserved. REV111104
P.O. Box 457, 370 N. Main Street
Marlborough, CT 06447 U.S.A.
Phone: 860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
Home Page: www.imshome.com
TECHNICAL SUPPORT
Eastern U.S.
Phone: 860/295-6102
Fax: 860/295-6107
E-mail: [email protected]
Western U.S.
Phone: 760/966-3162
Fax: 760/966-3165
E-mail: [email protected]
IMS MOTORS DIVISION
105 Copperwood Way, Suite H
Oceanside, CA 92054
Phone: 760/966-3162
Fax: 760/966-3165
E-mail: [email protected]
IMS EUROPE GmbH
Hahnstrasse 10, VS-Schwenningen
Germany D-78054
Phone: +49/7720/94138-0
Fax: +49/7720/94138-2
E-mail: [email protected]
European Sales Management
4 Quai Des Etroits
69005 Lyon, France
Phone: +33/4 7256 5113
Fax: +33/4 7838 1537
E-mail: [email protected]
German Sales/Technical Support
Phone: +49/35205/4587-8
Fax: +49/35205/4587-9
E-mail: [email protected]
Product information covered by IMS Product Disclaimer available at www.imshome.com.
Visit the IMS web site for the most up-to-date product information.
Distributed By: