Integra DTR-5.2 - Manual (Page 24)

24
Selecting a preset radio station
1. Press either the AM or FM input
source button. The front display
should show the currently selected
frequency.
If it displays the listening mode, press the Display button to
display the frequency.
2. Press the Preset / button and
select the number of the desired
preset station.
When using the remote controller:
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the TUN button.
3. Press the CH button and select the number of the
desired preset station.
Listening to Radio Broadcasts
Erasing a preset radio station
1. Press the AM or FM button and press the Preset /
button to select the preset radio station that you want
erase (see above).
2. Press the Preset Memory button.
“PRESET IN?” appears.
3. Turn the jog dial to display “PRESET
ERASE?”
Preset
Preset Memory
Push To Enter
DSP / Mode ADJ
ch
Standby/On
Standby
Power
On O f f
Phones DVD Video 2 Video 1 Video 3 Bass Treble
Master Volume
Smart Scan Navigator Dimmer Display Tuning FM Mode Preset Memory Preset
VCR
Audio Selector Tape FM AM Phono CD
Push To Enter
DSP/ Mode ADJ Setup
Return
CH Level A B Speakers
HOME THEATER CONTROLLER RC-441M
AM FM
Preset Memory
Preset /
RCVR
MODE
CH
TUN
Jog dial
Presetting a radio station
1. Tune into the radio station you desire (see “Tuning
into a radio station” ).
2. Press the Preset Memory button on
the front panel.
“PRESET IN?” appears in the front display
for about five seconds.
4. Turning the jog dial, select a preset
number (from 1 to 40) to assign the
station to be preset.
5. Press the jog dial to finalize the
procedure.
This programs the radio station as a preset
radio station.
• Up to 40 stations can be stored in memory
as preset radio stations.
3. Press the jog dial.
The MEMORY indicator lights red.
Preset Memory
Push To Enter
DSP / Mode ADJ
Push To Enter
DSP / Mode ADJ
Push To Enter
DSP / Mode ADJ
MEMORY
“MEMORY”
(Lights red)
MEMORY
TUNED
ch
Flash
“MEMORY”
(Lights red)
4. Press the jog dial.
The selected preset station is erased.
ch
Push To Enter
DSP / Mode ADJ