IronPort Systems ES-1528 - Manual (Page 115)

Chapter 18 SNMP
ES-1528 User’s Guide
115
The following table describes the labels in this screen.
18.6 SNMP Trap Station
SNMP traps are used to send out SNMP notifications of urgent or normal events in the system
to external management stations. Use the SNMP Trap Station screen to enable the sending of
SNMP traps to a remote SNMP management station(s). Click SNMP > Trap Station to view
the screen as shown.
Figure 69 SNMP Trap Station
The following table describes the labels in this screen.
Table 49 SNMP Notification
LABEL DESCRIPTION
Enable SNMP
Notification
Select this to enable the sending of SNMP traps to a remote SNMP management
station.
Enable
Authentication
Notification
Select this to enable logging of failed authentication attempts.
Apply Click this to save your settings to the switch.
Table 50 SNMP Trap Station
LABEL DESCRIPTION
Trap Station ID Select the SNMP trap station you want to edit.
Create New
Trap Station
Click this to configure a new SNMP Trap Station.
Trap Station ID This field indicates the trap station number. It is used for identification only. Click on
the individual trap station number to edit the trap station settings.
Remote IP
Address
This field displays the IP address of the remote SNMP management station.