IronPort Systems ES-1528 - Manual (Page 53)

Chapter 5 System
ES-1528 User’s Guide
53
From the System screen, click Upgrade in the Firmware Version field to display the screen as
shown next.
Figure 25 Firmware Upgrade
Type the path and file name of the firmware file you wish to upload to the switch in the File
Path text box or click Browse to locate it. After you have specified the file, click Upgrade.
After the firmware upgrade process is complete, see the System > Status screen to verify your
current firmware version number.
5.3.1 System: Restart/Reset
Click System > Restart/Reset to perform a system restart (keep current configuration) or a
system reset (restore the switch’s default configuration settings). Follow the instructions in the
screen below to reset or restart the switch.
Figure 26 System: Restart/Reset