IronPort Systems ES-1528 - Manual (Page 98)

Chapter 17 Event Logging
ES-1528 User’s Guide
98
Figure 52 Logging
The following table describes the labels in this screen.
17.3 Logging - Add Server
Use this screen to configure a new syslog entry. Click Add Server in the Logging screen to
view the screen as shown.
Table 33 Logging
LABEL DESCRIPTION
Add Server Click this to configure a new syslog server.
Logging Target Click the RAM or Flash links to view the logs stored on the switch.
Use the columns on the right to select the types of system events each logging
target should record. Select:
•
Error - to record system failures, such as events which will cause the switch to
malfunction and events such as invalid user input in the web configurator.
• Warning - to record non critical errors on the switch. The switch will continue to
function when warnings are recorded.
• Info - to record regular system events, such as configuration changes or logins.
• Debug - to record events which can be helpful for engineering debugging of the
switch’s function. This field is not recommended to track as it creates many
messages not helpful to typical users.
For RAM and Flash logs you can also hit Clear to delete all log entries.
For each Server log you configured you can hit Delete to remove this syslog server
from logging system events for the switch.
Apply Click Apply to save your changes to the switch.