Intellinet Network Solutions 550000 - Manual (Page 12)

Network Video Server User’s Guide
12
Rear Panel
Power Connector: Only use the AC Adapter provided by your dealer to avoid any possible
damage from electric shock.
Power Out, Digital Input, Digital Output : To connect external devices such as infrared Sensors,
alarms, or motion detectors (please refer to Appendix F – The I/O Connector).
Ethernet Connector: Connect 10baseT Ethernet or 100base TX Fast Ethernet cable.
RS232 Cable Connector: To connect external devices such as external pan/tilt/zoom mechanism,
or directly to a serial port for configuration (please refer to Appendix G - RS 232 Cable &
Pan/Tilt/Zoom Control).
\
NOTE
Pan/Tilt/Zoom control interface of NETWORK VIDEO SERVER is initially set to
support RS485. If your pan/tilt/zoom camera uses RS232C interface, then, change the
control interface of NETWORK VIDEO SERVER as shown in page 60.
Power Ethernet RS232/485 Port
Power Out
Digital Output
Digital Input