Intellinet Network Solutions 550000 - Manual (Page 22)

Network Video Server User’s Guide
22
Gateway inet (g) is the gateway address of Network Camera
7. Type ‘c’ key to change the network configuration in [Boot] prompt. If you type ‘c’ key,
NETWORK VIDEO SERVER shows you the information you can change its values and the
current assigned values. You can change as the following figure.
8. When you terminate hyper-terminal program after you changed network configuration,
hyper-terminal program asks you whether you saved the session. If you saved the session, you
can re-use the hyper-terminal. To re-use the session you saved, click Start --> Programs -->
Accessories --> Communications --> HyperTerminal --> NETWORK VIDEO SERVER